Anti-Termite Reticulation System in Gurgaon

Quick answer

SKUAS lays anti-termite reticulation across Gurgaon, from DLF builder floors to villas in New Gurgaon. TermiPore porous pipe goes along every wall line before the ground floor PCC, and we charge it with Envu Premise SC at the IS 6313 dose of 5 litres per m². Junction boxes let us refill it every 2 to 3 years without drilling the floor.

TermiPore porous pipesEnvu Premise SC termiticideDosage as per IS 6313Written SKUAS warrantyServing since 2012

Gurgaon has several building markets running side by side. In DLF Phases 1 to 5, Sushant Lok and the older HUDA sectors, houses from the 1990s are being pulled down and rebuilt as builder floors over stilt parking. Along Golf Course Extension Road and the Dwarka Expressway, developers are raising high-rise towers on large land parcels, while the New Gurgaon sectors in the 80s and 90s fill up with plotted villas and low-rise floors.

These sites share one condition: semi-arid, sandy loam soil on the edge of the Aravallis, where termites forage deep and travel far for moisture. A single soil treatment at construction time does not suit a building expected to stand for decades. A porous pipe network laid at plinth level gives the owner, or later the RWA, a way to top up the barrier from outside.

Termite risk in Gurgaon: what we plan for

Sandy loam on the Aravalli edge

Much of Gurgaon sits on light, sandy loam that dries out quickly in summer. Subterranean termites respond by moving deeper and spreading their galleries wider in search of moisture, which brings them to damp spots under kitchens, bathrooms and the garden-facing walls of a new house. Pipe laid at plinth level sits right where those galleries meet the building.

Builder floors over stilt parking

Rebuilt plots in DLF and the old sectors usually carry stilt parking with several separately owned floors above. The stilt level is open, often wet from car washing, and in direct contact with the ground. Pipe along the stilt perimeter and around the lift and stair core keeps that shared level covered for every owner.

Landscaped villas and irrigated lawns

Villas on Sohna Road, in South City and in New Gurgaon often have large lawns, mulch beds and wooden decks against the house. Irrigation keeps that soil moist all year and draws termites toward the walls. We run pipe along garden-facing walls and place junction boxes where a gardener will not bury them.

Many sites under construction at once

In New Gurgaon and along the Dwarka Expressway, plots and towers are going up side by side. Excavated soil and construction debris are often left on vacant land next to finished homes. Until a neighbourhood settles, termite pressure on a new building can come from almost any direction. On such plots we make sure the boundary-side walls are fully looped.

Reticulation pipe layout along boundary and internal walls with junction boxes, and a cross-section at the plinth
Typical layout we install in Gurgaon: porous pipe along every wall line, refilled through junction boxes outside.

Pipe and chemical we use in Gurgaon

TermiPore porous pipe cross-section showing micro-pores on all sides

The pipe we install

TermiPore porous pipe

Made in Vadodara, Gujarat, India from a thermoplastic elastomeric compound with a honeycomb micro-pore wall. Termiticide seeps out evenly through micro-pores on all sides, unlike hand-drilled PVC that leaks at a few holes. The manufacturer rates pipe life at 30 to 50 years (manufacturer estimate).

Sizes, specs and how to spot genuine pipe
Envu Premise SC termiticide 1 litre bottle

The chemical we charge it with

Envu Premise SC

Imidacloprid 30.5% SC from Envu (formerly Bayer Environmental Science). It is odourless and non-repellent: termites cannot detect it, carry it back to the nest and pass it on to the colony.

Why we use Premise SC

Reticulation plans in Gurgaon

PipeGuard Basic

Boundary protection for compact homes

  • Coverage: External boundary (plinth perimeter) only
  • Pipe: TermiPore 17.5 mm (green stripe)
  • Refill points: Junction box every 25 to 30 m
  • Chemical: First charge with Envu Premise SC
  • Warranty: Up to 3 years written SKUAS warranty
  • Refill: Refill recommended every 2 years
  • Flow test before covering
  • Installation photos

Rate: shared after a free site inspection

Get my estimate

PipeGuard Max

Builders, societies and commercial sites

  • Coverage: Boundary, internal walls and under-floor grid
  • Pipe: TermiPore 19.5 mm premium (red stripe)
  • Refill points: Brass-nipple junction boxes every 20 m
  • Chemical: First charge with Envu Premise SC
  • Warranty: Up to 10 years written SKUAS warranty with AMC
  • Refill: Scheduled refills under AMC
  • Pressure and flow test log
  • As-built drawing for handover
  • Annual inspection report

Rate: shared after a free site inspection

Get my estimate

Every site is different. Soil, plinth size, wall layout and access change the final figure, so we confirm the exact rate after a free site inspection. Warranty is SKUAS's own written service warranty; the period depends on the plan and site conditions.

Free estimate in 30 seconds

Reticulation System Estimator

Get the pipe length, number of refill points, chemical quantity and the right plan for your building. Our engineer then shares the exact rate on WhatsApp or call.

Buildings we protect in Gurgaon

Stilt-parking builder floors

Pipe along the stilt perimeter, lift core and every ground-level room, protecting all owners from one system.

Villas in DLF, South City and New Gurgaon

Room-wise loops plus garden-facing wall lines, with ports placed clear of lawns, planters and garden paving.

Towers on Golf Course Extension Road

Basement and podium perimeter lines planned with the developer, with as-built drawings for the facility manager.

Offices, warehouses and Manesar units

Boundary and column-line pipe for corporate offices, Udyog Vihar units and the warehouses along NH-48 near Manesar.

How a Gurgaon installation runs

Gurgaon sites are served from our head office on Okhla Road in New Delhi. Before the visit we ask for the sanctioned building plan, since most Gurgaon rebuilds follow it closely and wall lines can be marked in advance. On builder floor sites we schedule pipe laying in the gap between plinth beam curing and soil filling, so the contractor is not held up.

  1. Free site visit. We measure the plinth and mark wall lines on your drawing.
  2. Pipe laying. TermiPore pipe on a levelled bed along every planned line, joined to junction boxes.
  3. Flow test. Water is pumped through each loop before the pipe is covered.
  4. First charge. Premise SC at the IS 6313 dose of 5 L per m² of floor area.
  5. Handover. Photos, port layout and your refill reminder schedule.

Chemical quantity per charge

Chemical quantity per charge (IS 6313 dose of 5 L per m² of floor area)
Floor areaDiluted emulsionPremise SC concentrate
500 sq ft≈ 230 litres≈ 490 ml
1,000 sq ft≈ 465 litres≈ 980 ml
1,500 sq ft≈ 695 litres≈ 1.5 litres
2,000 sq ft≈ 930 litres≈ 2.0 litres
3,000 sq ft≈ 1,395 litres≈ 2.9 litres
5,000 sq ft≈ 2,325 litres≈ 4.9 litres
10,000 sq ft≈ 4,645 litres≈ 9.8 litres

Areas we cover in and around Gurgaon

DLF Phase 1, DLF Phase 2, DLF Phase 3, DLF Phase 4, DLF Phase 5, Sushant Lok, South City 1, South City 2, Sohna Road, Golf Course Road, Golf Course Extension Road, Sector 14, Sector 15, Sector 17, Sector 23, Sector 31, Sector 45, Sector 46, Sector 56, Sector 57, Palam Vihar, Sector 65, Sector 82, Sector 89, Sector 92, Dwarka Expressway, Udyog Vihar, Cyber City, Manesar, Sohna.

Frequently asked questions: reticulation in Gurgaon

Normally the plot owner or the builder handling the collaboration, before the floors are sold. Since the stilt and ground level are shared, one system covers every owner. We hand over the port layout so whoever manages the building later can arrange refills.
Yes. The pipe releases the diluted emulsion through micro-pores along its full length, so it reaches the soil around the line without depending on rain. We charge at the IS 6313 dose of 5 litres per square metre of floor area, which wets the soil enough to form a treated zone.
Partly. We dig a trench along the outer walls, lay pipe with junction boxes and backfill it. Under the finished floors we use drill-fill-seal along the wall joints. From then on, the outer pipe can be refilled every 2 to 3 years without disturbing the interiors.
Yes. For towers we plan pipe along basement retaining walls, podium edges and ground slabs, and provide a pressure and flow test log with an as-built drawing under PipeGuard Max. Timing is agreed with the site engineer before waterproofing and backfilling.
Book a free site inspection, or use the estimator on this page for an indicative chemical quantity. The final rate depends on the total wall length, the number of junction boxes and the plan you choose, and we share it in writing after the visit.

Aam sawal (Hinglish)

Plinth curing ke baad, filling shuru hone se pehle. Stilt aur ground floor sab ka common hai, isliye ek system sab ko cover karta hai.
Haan, pipe ke chhote chhedon se dawai aas-paas ki mitti me jaati hai, baarish ka intezaar nahi karna padta.
Haan, bahar trench me pipe aur andar drill-fill-seal.

Building in Gurgaon? Book a free site inspection

Our engineer visits, measures the plinth and shares an itemised quote. The best time is before the plinth beam or floor PCC.