Anti-Termite Reticulation Cost & Estimate

By the SKUAS reticulation team · Updated 13 October 2026

Quick answer

The cost of an anti-termite reticulation system depends on plinth area, the number of wall lines covered, pipe grade, junction boxes, construction stage and site access. SKUAS shares an itemised rate after a free site inspection. Use the estimator below for your pipe length, refill points and chemical quantity now.

TermiPore porous pipesEnvu Premise SC termiticideDosage as per IS 6313Written SKUAS warrantyServing since 2012

Free estimate in 30 seconds

Reticulation System Estimator

Get the pipe length, number of refill points, chemical quantity and the right plan for your building. Our engineer then shares the exact rate on WhatsApp or call.

Compare the plans

PipeGuard Basic

Boundary protection for compact homes

  • Coverage: External boundary (plinth perimeter) only
  • Pipe: TermiPore 17.5 mm (green stripe)
  • Refill points: Junction box every 25 to 30 m
  • Chemical: First charge with Envu Premise SC
  • Warranty: Up to 3 years written SKUAS warranty
  • Refill: Refill recommended every 2 years
  • Flow test before covering
  • Installation photos

Rate: shared after a free site inspection

Get my estimate
Most chosen

PipeGuard Plus

Most chosen for houses and villas

  • Coverage: Boundary plus every internal wall line (room-wise loops)
  • Pipe: TermiPore 17.5 mm (green stripe)
  • Refill points: Junction box every 20 to 25 m
  • Chemical: First charge with Envu Premise SC
  • Warranty: Up to 5 years written SKUAS warranty
  • Refill: Refill every 2 to 3 years with reminders
  • Flow test before covering
  • Layout sketch of pipe and ports
  • First-year inspection visit

Rate: shared after a free site inspection

Get my estimate

PipeGuard Max

Builders, societies and commercial sites

  • Coverage: Boundary, internal walls and under-floor grid
  • Pipe: TermiPore 19.5 mm premium (red stripe)
  • Refill points: Brass-nipple junction boxes every 20 m
  • Chemical: First charge with Envu Premise SC
  • Warranty: Up to 10 years written SKUAS warranty with AMC
  • Refill: Scheduled refills under AMC
  • Pressure and flow test log
  • As-built drawing for handover
  • Annual inspection report

Rate: shared after a free site inspection

Get my estimate

Every site is different. Soil, plinth size, wall layout and access change the final figure, so we confirm the exact rate after a free site inspection. Warranty is SKUAS's own written service warranty; the period depends on the plan and site conditions.

What decides the price

Cost factors and how they affect your quote
FactorWhy it matters
Plinth or floor areaSets the chemical quantity: 5 litres of emulsion per m² of floor area under IS 6313.
Number of wall linesMany small rooms need far more pipe than an open hall of the same area.
Coverage levelBoundary only (Basic), boundary plus internal walls (Plus) or full grid (Max).
Pipe gradeStandard 17.5 mm pipe or the 19.5 mm premium pipe for heavy-load zones.
Junction boxesOne box per 20 to 30 m of pipe; premium brass-nipple boxes on PipeGuard Max.
Construction stageBefore the plinth is easiest. Existing buildings need trenching along external walls.
Site access and cityBasements, tight plots and travel to Jaipur or Mumbai add labour time.
Refills and AMCRefills every 2 to 3 years, paid per visit or under an AMC.

What is included in every installation

  • TermiPore porous pipe, plain inlet pipe, elbows, tees, end plugs and fixing hooks
  • Junction boxes for every loop
  • Laying on a levelled bed of soil or sand along the planned lines
  • Water flow test of every loop before covering
  • First charge with Envu Premise SC at the IS 6313 dose
  • Installation photos and a layout of pipe and junction boxes
  • SKUAS written warranty as per your plan

Reticulation vs repeated drill-fill-seal over the years

A one-time soil spray at the foundation is cheaper on day one. But when it fades, the only way to reach the soil under a finished floor is drill-fill-seal: holes through the tiles every few feet, chemical injected, holes patched. That has to be repeated over the life of the building, with dust, noise and patch marks each time.

With a reticulation system, each later treatment is a refill through the junction boxes, done from outside in a few hours. You pay more once, during construction, and much less disruption follows for decades.

How to get an exact quote

  1. Use the estimator above, or call or WhatsApp us.
  2. Share your plan drawing if you have one.
  3. Free site inspection to measure the plinth and mark wall lines.
  4. Itemised quote with the plan, pipe length, junction boxes and warranty.

Frequently asked questions

It depends on your plinth area, how many wall lines are covered, the pipe grade, the number of junction boxes, the construction stage and site access. SKUAS shares an itemised rate after a free site inspection. The estimator on this page gives your pipe length, refill points and chemical quantity straight away.
Two buildings with the same area can need very different pipe lengths. A plot with many small rooms has far more wall lines than an open-plan warehouse. Quoting after measuring avoids surprise extras later.
The first installation costs more than a one-time soil spray because pipe and junction boxes are added. Over the life of the building it usually works out cheaper and far less disruptive, because every later re-treatment is a refill through the boxes instead of drilling through finished floors.
TermiPore pipe and fittings, junction boxes, laying on a levelled bed, a flow test, the first charge with Envu Premise SC at the IS 6313 dose, installation photos and the SKUAS written warranty for your plan.
Yes, each refill is charged separately, or covered under a refill AMC. The refill cost depends mainly on the chemical quantity, which follows your floor area.
Labour and travel vary. Delhi NCR sites are served from our Okhla Road office and Tricity sites from Mohali. For Jaipur and Mumbai our team travels for scheduled installations, which we include in the quote.

Aam sawal (Hinglish)

Rate site dekh kar tay hota hai: plinth area, diwaron ki lines, pipe grade aur junction box par depend karta hai. Free inspection ke baad exact quote milega.
Haan, upar estimator me area daaliye. Pipe ki lambai, junction box aur dawai ki quantity turant dikh jaayegi.
Haan, refill alag se ya AMC me hota hai. Ye mainly dawai ki quantity par depend karta hai.

Get your exact rate after a free site inspection

Our engineer visits, measures the plinth and shares an itemised quote. The best time is before the plinth beam or floor PCC.

Call +91 93166 66656WhatsApp usGet instant estimate