For homes and buildings in Greater Noida, including YEIDA plots on the Yamuna Expressway, SKUAS lays TermiPore porous pipe around the plinth and inner walls before the floor PCC. The pipe is charged with Envu Premise SC at the IS 6313 dose and refilled every 2 to 3 years through junction boxes, so no drilling is needed later.
Greater Noida was laid out on a larger scale than its neighbour. The Greek-letter sectors such as Alpha, Beta, Gamma and Delta have wide residential plots and many independent houses. Greater Noida West is a dense belt of high-rise societies, and Knowledge Park and the Techzone areas hold colleges, hostels and offices. Further south, YEIDA residential plots along the Yamuna Expressway are being built on as the area around the Noida International Airport at Jewar develops.
Many plot owners here build in stages. The foundation may be finished months before the walls go up, and the plinth often stands open through a monsoon. That gap is exactly when reticulation pipe should be laid. Once the ground floor is cast over farmland soil that already carries termite colonies, the chance to place a refillable barrier underneath is gone.
Large parts of Greater Noida and the YEIDA area were agricultural fields until recently. Crop residue, tree stumps and old field bunds support subterranean termite colonies that stay in the soil after the land is levelled. A new house on such a plot is often the first building those colonies have met.
In sectors where many allotted plots are still empty, a new house may have open land on two or three sides for years. Termites forage freely from that land. Pipe along the complete outer plinth, including any garage block or servant quarter, keeps a treated line between your building and the vacant plots.
Parts of Greater Noida West lie close to the Hindon, and the southern sectors drain towards the Yamuna. After heavy rain, water can stand on low plots for days. We lay the pipe on a levelled bed and test the flow before it is covered, so a settling fill does not choke the line.
Owners on YEIDA and Greek-letter sector plots often stop work between the foundation and the superstructure. We can lay and flow-test the pipe at the plinth stage and give the first chemical charge later, closer to the floor PCC, so the dose is not spent on soil that stays exposed to rain.
The pipe we install
Made in Vadodara, Gujarat, India from a thermoplastic elastomeric compound with a honeycomb micro-pore wall. Termiticide seeps out evenly through micro-pores on all sides, unlike hand-drilled PVC that leaks at a few holes. The manufacturer rates pipe life at 30 to 50 years (manufacturer estimate).
Sizes, specs and how to spot genuine pipe
The chemical we charge it with
Imidacloprid 30.5% SC from Envu (formerly Bayer Environmental Science). It is odourless and non-repellent: termites cannot detect it, carry it back to the nest and pass it on to the colony.
Why we use Premise SCBoundary protection for compact homes
Rate: shared after a free site inspection
Get my estimateMost chosen for houses and villas
Rate: shared after a free site inspection
Get my estimateBuilders, societies and commercial sites
Rate: shared after a free site inspection
Get my estimateEvery site is different. Soil, plinth size, wall layout and access change the final figure, so we confirm the exact rate after a free site inspection. Warranty is SKUAS's own written service warranty; the period depends on the plan and site conditions.
Free estimate in 30 seconds
Get the pipe length, number of refill points, chemical quantity and the right plan for your building. Our engineer then shares the exact rate on WhatsApp or call.
Outer plinth plus room-wise loops for houses in Alpha, Beta, Gamma, Delta and similar sectors, with ports near the gate.
Plinth-stage pipe for new homes along the Yamuna Expressway, scheduled around staged construction and long breaks in work.
Basement perimeter and tower plinth lines coordinated with the developer, with junction boxes in common areas for refills.
Boundary and column-line pipe for Knowledge Park campuses and units in the Ecotech and Surajpur industrial areas.
We serve Greater Noida from our New Delhi head office on Okhla Road. Because plots here are often built in phases, we stay in touch with the owner or contractor after the first visit and fix the pipe laying date only once the plinth beam is cast and filling is about to begin. For YEIDA plots further down the Expressway, we group nearby visits where we can.
| Floor area | Diluted emulsion | Premise SC concentrate |
|---|---|---|
| 500 sq ft | ≈ 230 litres | ≈ 490 ml |
| 1,000 sq ft | ≈ 465 litres | ≈ 980 ml |
| 1,500 sq ft | ≈ 695 litres | ≈ 1.5 litres |
| 2,000 sq ft | ≈ 930 litres | ≈ 2.0 litres |
| 3,000 sq ft | ≈ 1,395 litres | ≈ 2.9 litres |
| 5,000 sq ft | ≈ 2,325 litres | ≈ 4.9 litres |
| 10,000 sq ft | ≈ 4,645 litres | ≈ 9.8 litres |
Alpha 1, Alpha 2, Beta 1, Beta 2, Gamma 1, Gamma 2, Delta 1, Delta 2, Delta 3, Chi, Phi, Mu, Omicron, Pi 1, Pi 2, Zeta, Eta, Swarn Nagri, Knowledge Park, Techzone 4, Greater Noida West, Bisrakh, Kasna, Surajpur, Ecotech 3, Pari Chowk, YEIDA Sector 18, YEIDA Sector 20, Jewar.
Our engineer visits, measures the plinth and shares an itemised quote. The best time is before the plinth beam or floor PCC.